2. High ambient temperature

If the on-site temperature environment of the fast door installation is relatively high, then whether it is caused by the high temperature caused by the natural environment or the internal temperature of the workshop, this high temperature may be indirectly transmitted to the door equipment, so the fast door manufacturer recommends users here If the site environment temperature is relatively high, then it is necessary to choose a suitable fast door, so that the use is more reasonable.

  3. The fuse is blown

Fast doors are often used, and it is inevitable that the fuse may be blown, then it may cause loops, such as increased load, etc., which will cause the temperature of the door equipment to be too high, then we should check the fuse, and it should To be replaced, and to be timely.

  4. Exceeding rated conditions

If the fast door is frequently used for starting and closing, and the frequency is very high, and it has exceeded the rated working condition, it will also cause the problem of heavier load and the temperature will rise, so the fast door manufacturer reminds users here that we should It is necessary to adjust the motor and rated working conditions in time to ensure that it meets the actual needs.

  5. The wiring method is incorrect

If it is a star-shaped wiring method, then the heat dissipation between the lines will definitely not be uniform, so we can use the added method, using the delta wiring method, so that the degree of heating of the equipment can be reduced, which is even better.