At present,high speed door widely used in the industrial field, and the site environment and installation conditions are also different. Considering the position required for the door box and motor installation, it is generally necessary to confirm the reserved size of the door before installation. Don't worry if the space is small, the following solutions can solve the lack of space in most cases.

Two solutions to the lack of installation space for high speed door

1. If there is insufficient space on both sides, the external motor can be replaced with a built-in motor. Even if there are obstacles such as water pipes or electric boxes on the left and right sides of the door opening, it can be installed when there is insufficient space to reserve. the

2. If there is not enough space at the door head, the ceiling can be removed or a hole can be drilled, and the door box can be placed in the ceiling, so that it can be installed and used normally without affecting safety.

If there are special circumstances at the installation site before purchasing the high speed door, you must inform the business personnel in advance so that the manufacturer can understand the actual installation environment and adjust the installation plan, otherwise it will lead to problems such as failure to install, especially after the product is transported to the site. In case of any situation during self-installation, you must communicate with the after-sales service in time to avoid damage to the door body caused by improper operation and cause losses.