1. Emergency stop button function detection

The function of the emergency stop button is specially designed when the fast rolling door is running, which has a positive effect on protecting personal safety. When detecting the function of the emergency stop button of the fast rolling door, you can press the emergency stop button during the operation of the door to see whether the fast rolling door stops immediately. If the door body does not stop immediately, it is necessary to check whether the emergency stop button is faulty or damaged.

2. Infrared anti-fall performance debugging

The infrared anti-fall function is also a safety protection device for fast rolling shutter doors. During detection, you can cut off the infrared radiation system during the falling process of the fast rolling door body to see whether the fast rolling door door body rebounds and rises to the opening position in time. Note: When testing the infrared anti-fall function, you must pay attention to your own safety to prevent accidents caused by the failure of the infrared system.

3. Automatic opening function detection

Automatic opening is one of the reasons why fast rolling doors are favored by industrial enterprise users, and it is also one of the most important functions of fast rolling doors. To detect this function, you can use the movement of vehicles and personnel to simulate the actual situation, and observe whether the door can be opened in time and whether there is no dead angle signal coverage in all corners.

4. Upper and lower limit debugging detection

The upper and lower limit positions are related to the daily use of the fast rolling door. Once the fast rolling door is inaccurately switched, the sealing and energy-saving function of the fast rolling door cannot be guaranteed. During the upper and lower limit test, you can press the up button when the door is still, and the door will run upwards. After the buffer stops completely, judge whether the lifting height meets the user's requirements. If the requirements are not met, perform debugging again. In the same way, press the down button to check whether the stop position of the end of the PVC quick roller shutter body is in place, if not, adjust it in time.