The Necessity of Installing Fast Doors in Auto Parts Workshop
From:SEPPES Author:Estelle Publish time:2022-08-02 13:51 Clicks:2
In recent years, with the development of the domestic electric vehicle industry, it has directly driven the rapid progress of the domestic automobile industry, established many domestic electric vehicle brands, and the auto parts industry has gradually developed. There are more and more types of automobiles. With the improvement of living standards, people's consumption of automobiles is also increasing. The market demand for auto parts is becoming larger and larger, and its production workshop is related to product quality. And production efficiency, so installing a suitable high speed door can effectively improve the efficiency of the workshop and improve the environment in the workshop.
The auto parts workshop is affected by many environments, such as temperature. The low temperature environment will cause the physical shrinkage of the auto parts, the solidification of oil, the reduction of mechanical strength, the embrittlement of materials, the loss of elasticity and the freezing. The phenomenon of softening, expansion and evaporation, gasification, cracking, melting and aging of automobile parts occurs, and the high-speed door can effectively insulate the temperature and has a good sealing effect. It will also be affected by humidity and heat. The environmental humidity will deteriorate the metal surface materials, reduce the strength and insulation resistance, and reduce the gas performance. The opening and closing speed of the high-speed door can effectively isolate the indoor and outdoor air circulation and ensure the humidity environment in the workshop. The workshop will also be affected by sand and rain environment. The sand and dust environment is easy to cause wear and blockage of parts, which will cause the filter to fail and the air sealing performance to decrease. To accelerate the corrosion of metal surface, the door frame of the high-speed door is equipped with double-row card-type sealing brushes, which can prevent dust and insects, and protect the equipment parts in the workshop.
The door body of SEPPES is made of cold-rolled steel plate and laser-built into one piece. The frame of the door body is not easy to be deformed. The system adopts German brand, which is simple and easy to use and more accurate. Safety optoelectronic adopts Korean brand, and the response is fast and reliable. Brand development is a responsibility to customers and a strategy for sustainable development.